/qresearch/ - Q Research

'''another piece in the "what's the in the jabs" series'

wow. hard to listen to but necessary.

https://www.worldviewweekend.com/tv/video/vaccine-patents-track-who-you-associate-when-you-go-church-and-your-social-credit-score

Vaccine Patents to Track Who You Associate with, When You Go To Church And Your Social Credit Score

Karen Kingston on Brannon Howse LIVE, 08 October, 2021

44 minutes

She is a former Pfizer employee.

KK - She was hearing someone talking about patents on vaxxes re AI controlling behavior

DOD is tracking covid deaths and infections - came up with algorithm about who should be injected over 65

Info is horrifying.

BH - 60 Minutes admits there's a vial with green goop given to sailor - will send signals back as to whether he is coming down with a disease and treated in advance. So that tech exists. A doc wondered if there is anything in the vaxxes that is sending back a signal. Buys a signal and goes with a patient to detect signals. Nothing. Then brings in a cell phone. Takes it out of the room. Room is now clean. Does expt again. Now it's getting sent a signal. Therefore: the cell phone appeared to activate the sending of a signal.

KK - yes, this sounds more than plausible.OECD - Org for Economic Cooperation and Development.

There's a patent for controlled release of therapies. there's a magnet involved. Re OECD: Secy of Defense: Blinken spoke at this org on Oct. 5 in Paris. Plays vid by Blinken. wants to make sure that others share our "shared principles." "Ai must respect human rights and democratic values." 38 member nation states. Goal - to work with trustworthy AI that respects humanity. Goal - to get to zero percent carbon emissions. Speak of AI as though it is an enemy that has taken over. They want to create a global tax - they want in Int'l Tax System. Integrate AI into

Dr. Lynn Parker - head of AI at WH. Jan 2022 - goal is to have AI integrated across our society.

KK - DOD's goal is to transform the DOD thru AI- it will be taking over the workforce, integrating all aspects of society

Americans must be taught to interact "appropriately" with AI

Injections are an expt on the American people to inject us with these substances that will prepare us for this.

Patent app - March 2021, fully grants on Aug 2021.

What is does: selecting subjects for treatment of a pathogenic disease using devices transmitting your ID, it predicts the likelihood of someone transmitting a pathogen to others - it generates a SCORE based on a bunch of factors, including social behaviors

CAP

con't.

>>14794648

tyb

>>14794649

>Found it.

>>14794650

They are using pandemic and vaccines to set up a HUMAN TRACKING SYSTEM - see cap for examples of 3 people's scores

Like a form of contact tracing that takes into account EVERYTHING to determine who needs another injection - like WHETHER YOU ATTEND RELIGIOUS GATHERINGS. Might be a super spreader

BH: COVID has been cover for the imposition of this TRACKING SYSTEM and SOCIAL CREDIT SCORING.

HOW THEY THINK: By being a human being, you are infectious.

BH: If a bunch of like-minded people get together, it will flag that group to get a booster soon. Or make them sick/dead.

PROPHYLACTIC TREATMENT defined asa preventtive measure taken to fend off a kisease or another unwanted consequence

WHAT KIND OF UNWANTED CONSEQUENCE????

They can also inject you with a microorganism.

Gov't may mandate that we have to download an APP to help gov't with logistics of vax procedures.

They can track whether or not you have a mask on your face, washing your hands, exercising, etc.

Discussion: If you're too disobedient, you may be deemed a superspreader. May need high potency vax!

[got furious listening to POS Blinken talk about 'democracy' when it means 'DEMONCRACY]'

KK: this is already organized. Their job is to convince us that America is evil. Those who believe in the Constitution have no place in this world. They just to take our America and our allies - 10 countries. Purpose of vax is NOT to prevent disease.

K's website:

patriotsatmyfight.com

they are looking for patriots who know of children have been hurt by any vax.

>>14794612 (lb)

>Bill Clinton dead…

Interesting Wikipedia edits…

Pic related.

>>14794648

tyb

nah, din think that was cmz

>>14794616

>#18714: 5-steps ahead Edition

there is no step 5

>>14794649

tyvm

>>14794648

TY Baker!

Judge orders Chicago’s Fraternal Order of Police President John Catanzara to stop making public comments encouraging his members to defy the city’s COVID #vaccine mandates - WMAQ

https://t.me/electionwizard/680

>>14794539 lb

>>14794519 lb

creepy

>>14794669

14. Mold assembly

Next, we will present the steps for fixing the mold together

A. Place the pins into the inner bolt circle until you have a plane surface on the bottom of the mold and place the bushings over them. This way, you ensure a fixed placement of the bushings.

< 1

B. Place the central plug to obtain the same plane surface on the bottom. Place the first wooden ring and fix it to the base of the mold using the bolts. Before placing the coils into the mold, pour a 1/8 inch thick layer of resin and let it harden.

< 2

C. After the resin hardens and removes the nuts from the bolts holding the stator mold together. Fix the coils on the hardened resin and place the wires as shown in the picture - around the small bolts.

< 3

D. Lastly, place the second wooden circle over the first circle. This will ensure a tight fixture. The second wooden circle goes over the wires. After the second wooden circle is tightly fixed with nuts, you can pour the rest of the resin into the mold.

< 4

>>14794663

>>14794655

Two conservative members of Biden's Supreme Court commission resign

https://justthenews.com/government/courts-law/two-conservative-members-bidens-supreme-court-commission-resign

According to The Hill, Harvard law professor Jack Goldsmith and University of Virginia professor Caleb Nelson both resigned.

In a statement to The Hill, Nelson said ​​“it was an honor for me to be part of the Commission.” Goldsmith, on the other hand, did not respond to requests for comment.

In a statement, the White House expressed its appreciation for the work conducted by both professors on the commission.

“We respect their decision and very much appreciate the significant contributions that they made during the last 5 months in terms of preparing for these deliberations,” White House spokesman Andrew Bates said.

The resignations just come one day after their committee released its preliminary findings warning against the idea of court-packing, and advocating for term limits for federal justices.

Many progressive members of the commission expressed their concern over the fact that the report only gave arguments against court-packing, rather than giving both sides of the issue.

It is not yet clear if any of the suggestions laid out in the report will be implemented by Congress.

Mindy Robinson, [15.10.21 21:00]

They just indicted a Capitol police officer for telling someone they shouldn’t be posting incriminating information on social media.

Meanwhile, they’re letting murderers slide in Chicago claiming it’s just “mutual combat.”

Our judicial system no longer serves Justice….it’s only a weaponized politics punishment machine now.

https://t.me/AmericanAFMindyRobinson/448

Capitol Police Officer Indicted For Telling January 6 Rioter To Hide Evidence

A United States Capitol Police officer has been indicted on charges related to helping someone conceal evidence in relation to the January 6 Capitol incursion.

Officer Michael A. Riley has been accused by prosecutors of contacting someone whose post he read on Facebook and tipping them off, The Associated Press reported.

The officer, who has been on the force for around 25 years, noticed the post with the photo of the person inside that Capitol on January 6 and advised them to remove it from Facebook.

Riley, 50, appeared virtually in federal court in Washington and was released with several conditions, including that he surrender any firearms and not travel outside the U.S. without permission from a judge. He was ordered to return to court later this month.

Riley, who responded to a report of a pipe bomb on Jan. 6 and has been a Capitol Police officer for about 25 years, had sent the person a message telling them that he was an officer with the police force who “agrees with your political stance,” an indictment against him says.

The indictment spells out how Riley sent dozens of messages to the unidentified person, encouraging them to remove incriminating photos and videos and telling them how the FBI was investigating to identify rioters.

Riley’s attorney did not immediately respond to a reporter’s message seeking comment.

The day after the January 6 incident at the Capitol Riley allegedly messaged the man and advised them to hide the evidence of their involvement.

“Hey [Person 1] I’m a capitol police officer who agrees with your political stance,” he allegedly said. “Take down the part about being in the building they are currently investigating and everyone who was in the building is going to charged. Just looking out!”

“The only thing I can see is if you went into the building and they have proof you will be charged. You could always articulate that you had nowhere to go, but that’s for court,” he said in another message.

The two exchanged dozens of messages after that and, in one, the person said that their presence at the Capitol was drawing attention online, to which Riley allegedly responded, “Get off of social media.”

“They’re arresting dozens of people a day,” he said. “Everyone that was in the building. Engaged in violent acts or destruction of property and they’re all being charged federally with felonies.”

When the person asked Riley if he had been charged, Riley said “Call me,” and the pair talked for 23 minutes, the indictment alleged.

Within hours of that call the person contacted others and informed them that he had spoken to “Capitol Police” and that he would likely face trespassing charges.

On January 19 the man was arrested and interviewed by the FBI and on January 20 he messaged Riley again.

“The FBI was very curious that I had been speaking to you. If they haven’t already asked you about me they are gonna. They took my phone and downloaded everything,” he said.

“That’s fine,” the officer said, and then deleted his messages with the man.

On January 21 Riley messaged the man again and this time informed him that he would no longer be talking to him.

“Hey [Person 1], another mutual friend was talking about you last night. I tried to defend you but then he showed me a video of you smoking weed and acting like a moron. I have to say I was shocked and dumbfounded …,” he said, the indictment alleged.

“I was so mad last night I deleted all your post, but I wanted to text you this morning and tell you that I will no longer be conversing with you,” he said.

https://conservativebrief.com/police-officer-indicted-52840/?utm_source=CB&utm_medium=922

>>14794678

>>14794656

Bill Clinton hospitalized with sepsis

https://thehill.com/homenews/news/576882-bill-clinton-hospitalized-with-sepsis

according to the CDC - Centers for Disease Control and Prevention, sepsis is an extreme response to an infection and is a life-threatening medical emergency. Around 1.7 million adults in the U.S. develop sepsis every year and roughly 270,000 people die due to the condition.

15. Preparing the mold

Materials:

 West Systems Epoxy 105 resin

 Spray Adhesive

 West Systems 206 slow hardener

 Ruler

 West Systems pump set

 Utility Knife

 Polyethylene film, two mil

 Vaseline Mold

 release paste

A. Before assembling the mold, apply mold release paste onto the parts of the mold that the resin will reach. Repeat two times, after 10 minutes of soaking.

B. Clean bushings with a solvent.

C. Draw the patterns of the coils on the Polyethylene film. Apply on the other side adhesive spray then spread the film on the base of the mold. Remove any wrinkles that might have remained.

< 1

D. To prevent any leaks, pour mold release in excess on the bottom of the mold, where the outer pins are placed. Remove the extra mold release after placing and fixing the first outer wooden circles.

E. Grease the inside of the bushings with vaseline and place them together with the pins. F. Place the center plug into the central hole after coating it with mold release paste.

G. Place all coils into the mold, as shown in the picture and place the second wooden circle on the loose wires. The center plug must be at the same level as the second wooden circle. Now, look carefully if the coils are placed 1/8'' below the level of the mold. Remove the coils after removing the second wooden circle.

< 2

Pouring epoxy – dry time test

H. You need to pour this stator in 2 layers. The first layer must set up to tack-free before you pour the next level. This is to create a chemical bond between the two layers and to ensure that the coils will not sink.

I. Following the step by step instructions, mix up a test batch to calculate the time it takes to dry. The next step is to pour a 1/8" layer of epoxy and measure the time it takes to dry. The epoxy will start from the consistency of syrup, then form peaks, then finally hold its shape with the consistency of jello. By this time the epoxy you have already poured will become tack free, and you can pour the second layer. Time will vary with temperature, humidity and time of mixing.

>>14794663

>>14794680

>>14794684

>>14794658

Got it. I will correct that in the next one.

#18711

https://twitter.com/search?q=%22Joe%20Manchin%22&src=trend_click&vertical=trends

Responding to Senator Bernie Sanders' call for him to support the Build Back Better Bill, Senator Joe Manchin said: 'This isn't the first time an out-of-stater has tried to tell West Virginians what is best for them despite having no relationship to our state'

>>14794662

>5-steps ahead

Q14

"10-4"

16:00 is 4pm

17:00 is 5pm

Q14 timestamp is very "35"

23:29 on the clock tomorrow

5/29 is #35's birthday "10-4" (104) years ago this year.

>>14794690

>>14794683

>>14794655

https://www.webmd.com/a-to-z-guides/sepsis-septicemia-blood-infection

So what does old Pedo Willy have sepsis from?

Vaccine or an STD giving him a UTI?

>>14794660

Sham er rocker shamrock a doddle shame rockrr rock a doddle rocking the rock a doodle

>>14794663

>>14794703

>>14794646 lb

>still hoping john galt is Jfk jr…

hopium on fentanyl–

Pouring epoxy – first layer

J. Asses the volume and prepare the quantity. If not sure, add 10% to cover the errors. K. Using the West Systems epoxy system, take one pump from resin, then one pump…

< 1

L. Next pour into the mold and let it sit for the test dry time to set up to tack free. Note that in the next picture, the resin is hard to see since it is clear.

< 2

>>14794663

>>14794680

>>14794694

FWIW

I archived the previous bread with all the magnet stuff, for anyone who is interested

http://archive.today/2021.10.16-033559/https://8kun.top/qresearch/res/14793862.html%23top

Bill Clinton’s last tweet was on the 6th. The video features a book drop at the library.

6 days later HRC’s book drops in stores.

2 days later, Bill is in the hospital with sepsis.

It will be interesting to see if Monday the 18th (6 days from the book drop) brings any Bill news and completes the 666.

Gold created the Fed. Gold will destroy the United States.

You will also see Mein Kampf dismissing a gold standard.

The only reason for the bank panics of the late 1800s is that the Jews got us off the silver standard and back on to a gold standard.

JFK created SILVER certificates not gold ones.

Silver is the people's money. Gold is as dangerous as Bitcoin.

-tyb-

:Gratitude.

>>14794499, Jim Watkins, House Bill 25 was passed 76-54. The 54 gots to go.. Texas bill makes trans students play on sports teams according to birth gender (PB)

Should have never gotten to that point but "parents" were too busy on their phones/TVs/frivilous shopping while the UNIPARTY did its thing. Defeating Nazis while Communists infiltrated literally everything.

THE 45 COMMUNIST GOALS AS READ INTO THE CONGRESSIONAL RECORD - Jan. 10, 1963

4. Permit free trade between all nations regardless of Communist affiliation

6. Provide American aid to all nations regardless of Communist domination.

11. Promote the U.N. as the only hope for mankind. If its charter is rewritten, demand that it be set up as a one-world government with its own independent armed forces.

15. Capture one or both of the political parties in the United States.

16. Use technical decisions of the courts to weaken basic American institutions by claiming their activities violate civil rights.

17. Get control of the SCHOOLS. Use them as transmission belts for socialism and current Communist propaganda. SOFTEN the curriculum. Get control of teachers’ associations. Put the party line in TEXTBOOKS. 18. Gain control of all student newspapers. 19. Use student riots to foment public protests against programs or organizations which are under Communist attack.

20. Infiltrate the PRESS. Get control of book-review assignments, editorial writing, policymaking positions.

21. Gain CONTROL of key positions in radio, TV, and motion pictures.

22. Continue DISCREDITING AMERICAN culture by degrading all forms of artistic expression. An American Communist cell was told to “eliminate all good sculpture from parks and buildings, substitute shapeless, awkward and meaningless forms.”

23. Control art critics and directors of art museums. “Our plan is to promote ugliness, repulsive, meaningless art.” 24. Eliminate all laws governing obscenity by calling them “censorship” and a violation of free speech and free press.

25. BREAK DOWN CULTURAL STANDARDS of morality by promoting pornography and obscenity in books, magazines, motion pictures, radio, and TV. 26. Present homosexuality, degeneracy and promiscuity as “NORMAL, NATURAL, HEALTHY.”

27. Infiltrate the churches and replace revealed religion with “social” religion. 28. Eliminate prayer or any phase of religious expression in the schools on the ground that it violates the principle of “separation of church and state.”

29. Discredit the American Constitution … a hindrance to cooperation between nations on a worldwide basis. 30. DISCREDIT the American FOUNDING Fathers.

31. BELITTLE all forms of AMERICAN culture and discourage the teaching of AMERICAN history on the ground that it was only a minor part of the “big picture.”

32. Support any socialist movement to give centralized control over any part of the culture–education, social agencies, welfare programs, mental health clinics, etc.

36. Infiltrate and gain control of more UNIONS. 37. Infiltrate and gain control of BIG BUSINESS.

39. DOMINATE the psychiatric profession …

40. Discredit the FAMILY as an institution. Encourage PROMISCUITY and easy divorce. 41. Emphasize the need to raise CHILDREN away from the negative influence of parents. Attribute prejudices, mental blocks and retarding of CHILDREN to suppressive influence of parents.

42. Create the impression that violence and insurrection are legitimate aspects of the American tradition; that students and special-interest groups should RISE UP and use [“]united force[“] to solve economic, political or social problems… https://archive.is/cgbDt

https://www.beliefnet.com/columnists/watchwomanonthewall/2011/04/the-45-communist-goals-as-read-into-the-congressional-record-1963.html

>>14794688

Das chek

Pouring epoxy – second layer

M. Place the coils into the mold. Apply excess release paste to the outer edge of the second wooden circle. Make sure not to pour excess paste on the inside of the wall of the mold. Fix the second wooden circle and clean the excess release paste.

<

N. Check the quantity of vaseline on the tops of the pins and bushings that are not in the cast. Add more to cover if necessary to seal these areas against epoxy spillover.

O. By mixing as shown above pour epoxy into the mold until the level reaches just below the top of the mold (the second wooden circle)

P. Place a flat board that has been prepared with mold release on top of the mold, letting it rest on the center plug and the second wooden circle. Weight the board with anything available. This layer of epoxy will set up very quickly because it is thicker and it will level the surface of the mold. The board can be removed in roughly three hours.

Demolding

Q. You can remold in 24 - 48 hours, but to be sure, let the mold dry 4/5 days.

Demold in 24 - 48 hours, but let fully cure for four to five days.

R. You can polish the top side (the bottom one will be smooth because of the film) with emery until a smooth level is reached.

Note: You may obtain a slightly thicker or thinner stator. You can either adjust the thickness of the rotor flange, or the thickness of the rotor plates.

>>14794663

>>14794680

>>14794694

>>14794714

>>14794724

>>14794728

Incorrect.

16. Stator wiring

Three-phase alternators can be wired in two configurations: Y-configuration or delta. We chose to wire our generator in the delta to produce higher voltages and attempt to keep the current in the phases down. This means that each phase is wired in series:

<

The first column of the table (1A, 2A, 3A) should just have lengths of wire soldered onto them. Each phase is colored differently to distinguish them easily later. The next two columns show which leads to connect with pieces of wire, for example, 1B should be soldered to 4A, and then 4B should be soldered to 7A. The last column shows which lead to solder ground wires to (7B, 8B, 9B). This arrangement wires each phase in the series and brings the power out of each phase individually.

The three phases can be utilized in many ways but based on our production we are going to rectify the signal.

>>14794663

>>14794680

>>14794694

>>14794714

>>14794729

>>14794649

o7

>>14794730

>>14794728

Queen Elizabeth II Reportedly Advised to Give Up Drinking

[what? adrenochrome?]

Queen Elizabeth II is known to enjoy a dry martini in the evening before dinner, and sometimes allows herself a glass of champagne, according to reports.

* * * * *

The personal physicians of Queen Elizabeth II of Great Britain has forbidden the monarch from drinking alcohol. According to the Daily Star, the advice was given due to ageing-related health concerns, as her 96th birthday is approaching.

“It’s not really a big deal for her, she is not a big drinker but it seems a trifle unfair that at this stage in her life she's having to give up one of very few pleasures,” a family friend of the royal family said, as quoted by the Daily Mail.

In turn, according to the reports, former royal chef Darren McGrady, who cooked for the Queen from 1982-1993, said that Elizabeth II preferred to drink "sweet German wine" during dinner.

Earlier it was reported that on 12 October 2021, Elizabeth II first appeared in public with a cane without the direct recommendation of doctors. Despite her age, the queen uses a cane only in exceptional cases.

https://sputniknews.com/20211015/queen-elizabeth-ii-reportedly-advised-to-give-up-drinking-1089948266.html

>>14794676

That “creature” reminds me of

Jimbacrinus Crinoid Fossil

>>14794661

>>14794716

Just slap um wit a shamrock a doddle

17. Air gap optimization

The air gap represents the space between the front of a rotor and the front of the stator, on each side. If the casting is done correctly, you have very little space to adjust. The magnetic potential will highly depend on this space as it is relatively easy to fall off across the air and the performance of the generator will vary.

When assembling the generator, you can quickly optimize the gaps. Once you establish the final position of the stator, you can cut tension spacers and in the end replace the all- thread with high strength bolts. If the gap is too small, take extra care to ensure that the rotors are not hitting the stator at any point.

18. Rotor mount (flange)

The flange will be attached to the rotor plates. You need to mount them face to face. The flange also needs to have the same four holes drilled to align with the rotors. The tube must have the same diameter as the central hole of the rotors.

The rotor mount is built from aluminum because it is resistant to corrosion and it is light. Alternatively, it can be built from a different material.

A piece of appropriately sized steel or aluminum tubing can have a steel or aluminum ring welded to it. If this is done, one must be careful to weld evenly, so that rotating balanced is maintained. The thickness of the rotor mount should match the thickness of the stator. So you need to build it after the stator is cast to determine its proper size.

To attach the flange to the shaft, two bolts can be used. Have them placed at 90 degrees to one another for a better grip.

<

>>14794663

>>14794680

>>14794694

>>14794714

>>14794729

>>14794732

>>14794693

>how many of you anons get UTIs?

What puts certain men at a higher risk for UTIs?

Former President Bill Clinton hospitalized for infection but 'on the mend'

There are many reasons why a guy may get a UTI – all of them we take seriously and should not be ignored.

Men older than 50 tend to get more infections than younger men. As a urologist, I see men get recurrent infections when they do not properly empty their bladder because of an enlarged prostate. Beyond the prostate, men may not empty their bladder if they have nerve damage from stroke, uncontrolled diabetes or injury to the spine. Men can also get infections that start from the prostate or testicles that seed up into the bladder, or the opposite can happen where the infection goes from the bladder to the other organs. Kidney stones can also be a cause of infection. (I know this from personal experience – I've had a kidney stone myself!)

Younger men may also present with urinary infections because of sexually transmitted diseases. Men can also get an infection if they have a recent procedure done in the urinary system.

>>14794728

gun is backwards

they eject to the right

Every parent should be paying very close attention to Britney Spears and her court case against her dad. Her father basically acted as her pimp since childhood.

He been controlling & selling her to Disney & Hollywood her entire life. A mind control subject is spilling the beans in front of everyone's face.

Why was Rachel Guinness (Chandler) with Britney? Maybe because she pimped Britney out. Britney was used to it & became what she was programmed to do. God, I'd love to hear Britney Spears expose Rachel Chandler.

Anyone remember when Fred Durst was on the Howard Stern Show and talked about how Britney was "offered" to him & after a while he realized she was up to something?

>Fred said "she's not the sweet, innocent girl she seems to be"

https://www.blabbermouth.net/news/limp-bizkit-s-durst-dishes-dirt-on-britney/

They manufacture demons. Children are made evil. She turned the corner & woke up

>"Lord have mercy on my family’s souls if I ever do an interview!!!"

https://www.tmz.com/2021/10/15/britney-spears-warns-family-potential-interview-conservatorship/

Stay in the light. Do what's right.

>>14794528 (lb)

TY for the assist, anon. Now off to bed with my tired-assed self.

19. The driveshaft

The driveshaft is the metal bar that holds the flange and bearings. This element will spin at a high rate so take extra care when choosing the materials. We suggest stainless steel because of its resistance. At the end of the driveshaft (the one towards the collar) place a handle. Further explanations will be presented. You can manufacture any type of handle as long as it gives you leverage to make the driveshaft spin.

< 1

You can also use carbon steel if available because it is also resistant. Regardless of the material you will use, Permatex Anti-Seize (or similar) and caution should be exercised when assembled to prevent galling and corrosion.

You need to drill holes for the support of the flange to correctly assemble and securely lock them together.

20. Bearing selection

The bearings you need to use are simple flange bearings that you may have lying in your garage. We opted to use a collar onto the driveshaft that is fixed to the back of the bearing. The bearing's role is also to set the distance between the bearings.

21. Casing

The whole generator will have a casing to protect its elements. This casing is crucial when using the generator in extreme conditions, such as snow, rain, etc. The case can help protect against everything from ice buildup to organics buildup to animal strikes. If implemented properly, it may be able to extend the life of the generator and help prevent corrosion of the assembly and wear on the bearings.

< 2

>>14794663

>>14794680

>>14794694

>>14794714

>>14794729

>>14794732

>>14794744

>>14794743

>>14794655

>>14794683

>>14794705

This.

>>14794676

22. Implementation of the case

The case is shown here sitting with one of the end caps (before the end cap had been drilled). It is made from thin aluminum sheet and attached at the top and bottom to two aluminum boxes. They were folded out of the remaining aluminum sheet and riveted together. The box which you can see inside of in the photo is the bottom box. It has Dzus connectors which provide quarter-turn access. Also, the fasteners stay in the material, so there is no way to lose them when you open the case. The case attaches to each side of the top box via hinges. This allows each side of the case to be opened separately. The boxes will be bolted to the inside face of each end cap. The anti-chafe tape will be used on all edges that come in contact with the generator to facilitate a secure seal and prevent vibration noise and wear. To get the rounded shape of the aluminum shown here, use a roller setup or carefully hand roll it yourself around a mandrel of similar size.

Tension spacers

The tension spacers are the tubes wrapped around the mounting bolts. They set the distance between the stator and the rotors. They should be placed as close as possible, but be careful with the rotor and the stator not to touch. A strong but nonferrous material (brass/bronze/aluminum) should be used. This is the moment for the air gap adjustment.

<

>>14794663

>>14794680

>>14794694

>>14794714

>>14794729

>>14794732

>>14794744

>>14794757

>>14794751

Daily carry 1911 fag detected

>that's a 1911 right?

>>14794649

>>14794649

>>14794751

Should have used a revolver

>>14794776

Read carefully.

Generator assembly

Next, we will present the assembly of the generator:

1. Fix the bearing to the end cap and slide them together through the driveshaft until it fixes onto the collar. Tightly screw the system together.

< 1

2. Next, slide the first rotor plate (on the back side) then the flange and fix them together using the four bolt pattern. Consider using anti-seize or similar to prevent galling. Insert the locking pin into the flange to attach it to the driveshaft.

< 2

3. Place the stator onto the first rotor plate. Make sure that the rotor does not come in contact with the stator. If still not suitable, readjust the distance of the tension spacers.

< 3

4. Next, place the second rotor plate facing the stator. Make sure the position of this stator plate is accurate because it is crucial for the magnets to attract to one another. Be very careful at this step because the injury may occur. It is recommended to find a system of lowering the second plate into places, such as using wedges or small jacks. We used pieces of wood stuck in at 90 degrees and set the plate on. Then we inserted thinner pieces of wood next to them and pulled the larger ones out, thus slowly lowering the rotor. This was repeated until the rotor was in place.

5. Place the rest of the tension spacers and fix the back bearing. Fix it in place with the set screws, similar to the first bearing.

< 4

6. Place the second end cap and fix it to the bearing using the bolts.

7. Place the cast over the generator.

You now have the complete generator that can be attached to the small rotor.

>>14794663

>>14794680

>>14794694

>>14794714

>>14794729

>>14794732

>>14794744

>>14794757

>>14794768

Mandate tory mettalica>>14794781

>>14794663

You computer illiterate shmucks. A MAGNET is a BitTorrent link with a hash to download the "laptop from Hell" files.

The switch

The best switching arrangement has been to use a mechanical switch which acts as a single pole changeover switch mounted on the shaft of the motor (and electrically insulated from the shaft).

First, the switch connects the battery Plus through to the Plus of the motor, causing it to rotate, as the battery Minus is permanently connected to the motor Minus. Current then flows from the battery, through the switch, and into the motor

<

Then, just before 180 degrees of rotation has occurred, the switch opens and then connects the generator output through to the motor, with current flowing in the other direction through the switch.

>>14794663

>>14794680

>>14794694

>>14794714

>>14794729

>>14794732

>>14794744

>>14794757

>>14794768

>>14794792

https://twitter.com/WendyRogersAZ/status/1449215626514472963

>>14794772

>>that's a 1911 right?

yes

you can tell from the beer tab looking shape in front

if you push in that bottom button and turn the tab the gun will be disabled

a giant spring will also knock you teeth out

>>14790881lb

Hildawg looks like she’s hiding a murder weapon!

Trump did say at last rally Bill should be scared of her.

With the Maxwelll trial coming up, would be better if Billy wasn’t around to testify.

>>14794616

Trump & Dan COMMS?

https://twitter.com/michael379mn/status/1449200096663515136?s=21

>>14794690

>>14794813

>>14794804

Kek

Neat

>>14794807

Shamer doodles!

Uncle O doodle- must go back

>>14794787

>>14794808

>>14794793

FG&C

>>14794808

The inverter

A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC).

The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the DC source provides the power.

An inverter converts the DC electricity from sources such as batteries or fuel cells to AC electricity. The electricity can be at any required voltage; in particular, it can operate AC equipment designed for mains operation, or rectified to produce DC at any desired voltage.

< 1

The inverter will hook up to any 12 VDC battery and step up the voltage to 115 VDC and then converts that 115 VDC to usable 115 vac x 60 Hz, some are pure sine wave just as what is running into your home and some are modified sine wave inverters. You can run lights, TV's, VCR's, DVD players,

etc…

Battery

You can use a Batcap or other kind of battery with capacitors

The battery used in this project is a Batcap. It seems important to use a Batcap battery or one with capacitors and not a battery with chemical storage of the energy.

< 2

A battery made of capacitors can charge and discharge a lot faster than other types of batteries.

You can try to use standard batteries, but it seems difficult to use because of the high resistance to load.

Standard batteries need a lot of time to load.

You would also need a charge controller to control the load of the battery and to limit the power pushed into the battery otherwise the battery would not last long.

You can use standard batteries, but you would need more batteries.

< 3

Conclusion

To conclude, the best ways to reduce energy consumption is right under our noses. This device highlights how easy it is to fight against Big Energy with a simple method in a century of rapidly changing environmental and economic conditions.

If more and more methods like this one were available to the public, the energy crisis would seize to exist and we believe we would live in a better world.

>>14794663

>>14794680

>>14794694

>>14794714

>>14794729

>>14794732

>>14794744

>>14794757

>>14794768

>>14794792

>>14794799

>>14794787

If the masses could only learn to take control (besides God, of course) over themselves. It will require the shit being shocked out of them for anything to penetrate.

>>14794814

https://news.yahoo.com/bill-cosby-hit-another-sexual-171700115.html

somebodies don't like Cosby out of prison. makes me think he really might be the one to have squealed on Hollywood

Bill Cosby Hit with Another Sexual Assault Lawsuit by Former ‘The Cosby Show’ Actress

>>14794812

>>14794746

>how many of you anons get UTIs?

Not anymore.

Natural. Works great. Give it to your cat, too.

>>14794812

F?

>>14794746

>>14794693

>What puts certain men at a higher risk for UTIs?

>>14794838

>>14794845

List of tools

Multimeter:

A Digital multimeter is ok, but we highly recommended to use an Analogue Amp Meter, which goes up to 1 amp or more. You will also need the meter to measure your thermoelectric modules as well as your battery voltages.

< 1

Soldering Iron:

The Soldering iron will be used to solder the wires. The wires will still operate if the connections aren‟t soldered, though once you are sure it is wired correctly, you should solder all the connections.

< 2

Drill press:

< 3

Measuring tape: Gripper And of course:

The patent, screwdriver, wrenches, knife, and cutter

< 4 & 5

>>14794663

>>14794680

>>14794694

>>14794714

>>14794729

>>14794732

>>14794744

>>14794757

>>14794768

>>14794792

>>14794799

>>14794828

ALL DONE

>>14794842

https://twitter.com/NotTheRealKimS4/status/1449206692311404551?t=7hFXqrg5k3qQ2bVpDGOA4g&s=19

Scavino Facebook Flag

>>14794843

No Ring On Puma

burn a lama doodle

Why didn't Trump fire the treasonous generals?

>>14794855

>>14794834

>>14794865

Body parts.

>>14794874

yes

Kayleigh McEnany

@kayleighmcenany

Double exclamation mark Double exclamation mark Double exclamation mark

Quote Tweet

Matt Wolking

@MattWolking

· 15h

It’s real: Youngkin edges ahead of McAuliffe in Virginia race

https://twitter.com/kayleighmcenany/status/1449195648532852741

>>14794875

>do it doge!

Am gonna

>>14794774

>>14794869

>let's hope we…

>…staring contest

4950

12-Nov-2020 6:32:39 PM PSTQ !!Hs1Jq13jV68kun/qresearch11617856

GodBlessAmerica.png

Nothing can stop what is coming.

Nothing!

Q

QClock October 15, 2021

Huma on the Clock

X22 Report Official, [14.10.21 10:09]

[ Video ]

A look at what’s going on at the ports …

https://twitter.com/FX2trot/status/1448551934517026818?s=20

https://t.me/realx22report/4498

>>14794890

>>14794889

>>14794888

>ncswic

Strange place for an earthquake.

4.3 mag.

11.4KM deep. Pretty shallow.

>>14794889

>>14794827

That girl is pretty wild now;

The girl's a super freak;

The kind of girl you read about

In the new wave magazines.

That girl is pretty kinky;

The girl's a super freak;

I'd really like to taste her

Ev'ry time we meet.

She's all right; she's all right;

That girl's all right with me yeah.

She's a super freak, super freak,

She's super freaky; super freak, super freak.

Eat shit Jews.

>>14794887

canklitis