hi. im 13.
PIPE BOMB
Ingredients:
Ammonium Nitrate
Fuel, Oil or Gasoline and motor oil 1:1 ratio
Two flat boards
Bucket or other container for mixing ingredients
Iron or steal pipe bottle
Blasting cap
Wooden rode - 1/4 inch diameter
Spoon or similar measuring container
Step 1:
Spread a handful of the ammonium nitrate on the large flat board and rub vigorously with the other board until large particles are crushed into a very fine powder that look like flour.
Step 2:
Mix one measure (tablespoon/cup) of fuel oil with 16 measures of the finely ground ammonium nitrate in a dry bucket or other suitable container and stir with the wooden rod. If fuel oil is not available, use one half measure of gasoline and one half measure of motor oil. Store in waterproof container until ready to use.
Step 3:
Spoon this mixture into an iron or steel pipe which has an end cap threaded on one end. If a pipe is not absolutely, you may use a dry tin can, a glass jar or a heavy-walled cardboard tube.
Note: Take care not to tamp or shake the mixture in the pipe. If mixture becomes tightly packed, one cap will not be sufficient to initiate the explosive.
Step 4:
Insert blasting cap just beneath the surface of the explosive mix.
Note: Confirming the open end of the container will add effectiveness to the explosive