f8bc86 No.406462 [Last50 Posts]
This is something I've made for you guys, because fuck perfectionism.
ALPHA RELEASE - should be fully printable.
Download : https://mega.nz/#F!lSpBVIQb!YnXCnC1XRnt3sEIptYrttg
To those that haven't followed on smug, I am making a 3d-printable mold that you can cast a slime-girl's vagina out of whatever medium you want. You can do whatever the fuck you want with the resulting toys from this mold.
I am doing this as an exercise of getting over my process anxiety and perfectionism. I will be casting this in smooth-on ecoflex 00-30, and documenting my adventures of printing,post processing, and casting on both smug and here.
In the meantime I will post a rough of the progress I made on smug, and then get to dye testing.
____________________________
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
f8bc86 No.406463
As you can tell, this is a four-part mold. this is to accommodate split-colored lips for those who want it- which I do.
As for the color, based on advice from smug, I've personally settled on purple, with an off-tint lip. the renders are not what the final color will be, but are close enough to what I want things to ultimately end up.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
a4c369 No.406464
For now, these are what the parts look like in the slicer. Pic4 is what I'll be printing overnight and sanding during the day. In the meantime, I'll be experimenting with dyes and some other silicone I bought.
This is gonna be a hell of a trip, aside from the innards, each piece is going to take literally a full day to print.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
44a626 No.406466
Color tests with some old pigments and disposable, old silicone.
The resulting mix was unexpected, but neat, ultimately I'll go for a darker lip and a lighter body to make working time easier.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
4d4d29 No.406467
It has begun, three more days and the mold will be complete.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
ef5864 No.406468
>>406467
Do you really need support material on that piece? I do not see any extreme overhangs.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
813d9e No.406469
>>406468
Probably not, but I'd rather deal with sanding stray pieces from supports than sanding overhang deformations.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
a941f5 No.406475
>>406467
You know when I said "three more days"? Yeah, well now I'm eating my own words because real-life-based setbacks are pushing that date.
I might as well say "when it's done", which it will be. But for now, here's the finished innards and the face in progress.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
b4ad7c No.406477
Face printed smoothly, pics related are a size comparison, a test using the old silicone, and said silicone after it cured.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
b4ad7c No.406478
Someone on smug wanted pictures of it with things being stuck into it. so here you glow go.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
baf600 No.406479
as someone who is a maker, with multiple printers, and multiple years of 3d modeling experience.
you are doing gods work. and also good work might I add. props to you for going through the effort, actually thinking it out. DOING IT (keep us posted)
AND putting it up online for free, truly a lot of bro moves.
enjoy some kitty titties
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
e7580f No.406481
>>406479
Thanks man, means a lot to me, it makes me glad you guys enjoy this.
So, I went and did a thickener/silicone painting test, and changed my mind on the idea of painting the face with thickened colors. Too much time for my patience with this. Besides, I can't sand the face, no way, got no leverage to scrape the parts.
oh well, at least I'm getting better with using pigments.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
e7580f No.406482
The first wall of the mold is in progress. Still got a ways to go, but the end is in sight! at least one more day after tommorow.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
9b7785 No.406483
It's been nearly two weeks, and it's all coming together.
oh damn…
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
baf600 No.406490
looking good my dude. keep us updated.
how well is the center piece sanded? will having build line imprints in the silicon give more sensation or be more irritating? thoughts?
anyway, just put together my new ender 3 pro a few days ago. how long have you had yours? any advice?
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
baf600 No.406491
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
fed8bf No.406492
>>406490
My ender 3 is a few months old, it has quite a few aftermarket upgrades, springs, extruder parts, Borosilicate glass bed plate, and a cable guide.
I tried to sand it as well as I could. The flattest part of the shaft was easy to sand. the rest of it… not so much, can't get good leverage. I tried to dremel out some support joinings with a brush head, but that oddly caused cracks in the tail end of the print. I have no clue how as it's three wall layers on the print- that should be sturdy enough.
As for the feel, I heard from someone else who casted a 3d-printed onahole that 3d printed lines was an interesting sensation. I feel like mine's gonna probably be tight and ripply.
>>406491
>pic 2
Those for Yugioh?
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
fed8bf No.406493
Everything is poured. I will wait until morning to be sure it cures.
Now I will commence a dump of my documented progress in pouring the silicone.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
fed8bf No.406494
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
fed8bf No.406495
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
fed8bf No.406496
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
fed8bf No.406497
The color inconsistency between these pics and the last ones is not a light trick, that's simply me pouring the last amount with misaligned colors- more blue than red.
Tommorow, I will demold the toy, show you pictures, and trim off excess material.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
baf600 No.406499
>>406492
not for yugioh,
i used to and still do design and sell stoner accessories. used to be friends with several dealers and suppliers. in the pic are 2 grinder cards i was designing for a CBD business. and a simple 2 stage, toothless grinder with custom logo.
i would design 2 stage, 3 stage, custom shapes and in all sizes. (up to 15 cm or 6inch wide)
ABS where possible for its strength, pla aslo works but a lttle less durable
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
baf600 No.406500
>>406492
>>406492
the first pic is of a rolling station, i designed it with a slot for papes underneath and 2 hole for storage of brushes or rolled joints. I also a version of this i designed with a built in, detachable grinder.
point is, i have a lot of 3d designed stoner shit i made for people and myself
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
c79115 No.406501
>>406500
>3D printed stoner stuff
Huh. I just figured you were doing something memey with pic 1 and game pieces for pic 2.
Progress update: Everything cured properly
Ultimately, as for it's intended use, the toy sadly did not perform up to expectations. Way too tight, and this is 00-30 firmess we're talking about. I've decided that I'm going recast this, in 00-10 firmness, and will commence a dump of documented pictures.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
c79115 No.406502
Here's the toy, in it's fully unmolded state, along with a few innard shots.
I have to admit, I was disappointed as shit during first use, all this effort put in and it don't even feel right. Oh well, shit happens, I can always repurpose this material as filler for other things if I get around to that.
Gonna order me some softer material and recast another one.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
baf600 No.406503
good luck on the recast m8.
sorry to hear it was too firm.
the finish and the look are great though.
so props to that.
let us know as soon as you recast
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
b07a34 No.406508
>>406503
Thanks man, I'd definitely have pictures up when the new material comes in, I'm also thinking of coloring the recast in orange, it'd be too awkward to not have it a different color
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
baf600 No.406509
>>406508
fair enough,
do you need to order a different silicone?
or can you adapt the hardness of the stuff you have?
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
b07a34 No.406510
>>406509
With what I've got, I need to order completely new stuff.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
baf600 No.406511
>>406510
ugh
good luck and godspeed to you
cant find sometthng similar at a store nearby?
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
bb494f No.406518
Here's an idea: What if you made the onahole out of gummy candy?
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
10ec4a No.406521
>>406511
Sadly no.
>>406518
Could be doable, just make sure your mold sealed from toxins, is resistant enough to the temperature of the molten candy, and use play-doh as your sealer instead of Plasticine.
I know it's a shitpost, but I'm giving you benefit of doubt :P
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
bb494f No.406522
>>406521
Who says it has to remain a shitpost and not a possibility?
Why stop at gummy candy? How about Jell-O or that cornstarch+water mixture people use for home-brewed fleshlights. I'm just throwing ideas around.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
baf600 No.406523
>>406521
how long is the delivery of the new casting material
going to take?
also, what did you end up choosing for the next try?
>>406522
this will go bad really fast. once did the cornstarch lube and it started molding fast
>>406522
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
f98bd0 No.406525
>>406522 (checked)
Gummy candy and Jell-O are better for eating than they are fucking. Hell, if you're making slime-girl-pussy dessert, you can omit the shaft and seal that end with play-doh before you pour the food in.
Corn-starch goo is… well, I don't know, but I don't trust it for anything more than disposable one-time-use toying.
>>406523
Material is here. Smooth-On Ecoflex 00-10, squish-test of some partially-cured extra material has me very optimistic about how this will turn out to be.
Filled and curing as we speak, I'll probably demold it just before bed, depending on how the extra material I have cures with it. had a scare of leakage, but so far, everything seems to be fine when I had made some minor adjustments to the mold.
I'll add some notes to my upcoming readme/manual of this mold.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
f98bd0 No.406526
>>406525
and if anyone asks, the censor paint is because I did this on the classifieds and I want to protect my privacy.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
baf600 No.406527
>>406525
thanx for the info on the material
i assume its a 12/24 hour cure time?
keep us posted, and yee, i get the censor paint if it ties to your immediate surroundings
keep us posted, cant wait to find out if it turned out as you wanted
godspeed to you
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
940e95 No.406528
>>406527
You're welcome! The container on my material says that the silicone itself is at minimum, a 4-hour cure time, just like the ecoflex 00-30. Also, like most of the smooth-on's products, ways to extend the cure time include what amounts to baking it at 170F for an hour, and then hotter for some-odd other hours.
Ultimately, I'm thinking I'll still do an overnight in the laundry room, where it's summer heat when the door is closed.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
b02c44 No.406529
The mold has come apart, the toy has cured properly, my mind- and my dick, were blown away. 00-10 firmness is a quirky material, but for a tight kind of toy as this one, it's perfect.
00-10 silicone is squishy, kinda sticky when cured, and very tender. Your fingernails if jabbed into the material (I was playing with leftover material when I noticed this) will leave visible marks.
Furthermore, the difference between improperly cured silicone and properly cured 00-10 silicone is distinct but subtle: when properly cured, 00-10 is sticky, but dry, and should not leave residue- that is, unless the mold release was not properly cleaned off, or it cured improperly.
last set of pictures coming up soon
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
b02c44 No.406530
And that is it. Holy shit what a journey, even though it's not quite over, as I'm still going to seal up the mold seams with some of the leftover silicone & thickener I have. In the meantime, I will be doing the finishing touches on a manual/readme I've written up for this toy.
Thank you for being my audience, /monster/, I'll remain here to answer anymore questions for those looking to cast their own slimegirl vaginas.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
a8f377 No.406531
>>406530
>not using translucent silicone to get the slime look
You had one job.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
998616 No.406532
>>406531
Heh. Honestly, I tried, but red pigment ended up being way too opaque, so I'm going with what I got.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
1fec10 No.406533
Readme is done. if there are any errors, the formatting is kinda asinine, but It's good enough.
>>406462
The OP mega link has a .txt version for those who don't have/like .PDF files.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
9144e7 No.406534
>>406532
one last question to answer then.
How is it? How does it compare? also how does it compare to other fleshlites?
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
58148a No.406535
>>406534
>How is it?
Amazing, gooey, soft as hell, lube makes her nice and slimy, I'm satisfied, just need to fill some mold gaps and bubble holes of the outer wall with thickened material.
I don't really notice the 3d-printed line texture, I'm pretty sure that's a result of 00-10 being as soft as it is.
>how does this compare to other onaholes?
I'm picky as shit, so I've only shopped a few brands.
>Bad Dragon
Slimegirl V2 is vastly softer than Bad Dragon, BD's toys run about 00-20 shore if I remember. It makes me think that each 10 units up on the shore scale is ten times firmer than the last one. Don't quote me on that, I don't know much about the math of shore scale.
00-20 is a perfectly usable onahole firmness, what matters is the model you cast it with. Janine is fine, Mary is fine, but Sugar Star is ridiculously tight. She's so tight that it feels like when I try to cum, the toy physically won't let me fill her up, it's that tight. Forum posts say the butt-onaholes have the same problem of tightness that sugar star has.
For the record, I bought sugar star because it was the closest I could find to a rabbit-girl's vagina at the time. Then they released the massively-dropped ball that was Alice, and that was the beginning of the end for me.
>Lovesmiths
About the same as Bad Dragon, the main difference is the design model, which has a much more open shaft, allowing more leeway, so it feels slightly softer.
>Tomax
I own venus real & lilith in soft. If what /JP/'s ona-general says is true, then this is human comparable to a real woman. This is soft as hell, but it's hard to tell just the difference between tomax soft vs 00-10 slime girl right now.
Quick guess, it's about the same, the difference is, that tomax soft stretches much more than 00-10 slimegirl goes. ****
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
9144e7 No.406537
>>406535
without trying to sound like a dick,
have you ever slept with a real girl/woman?
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
0712cb No.406538
>>406537
I have not. As much as anti-IRL-fags would say otherwise, I would really like to find a lady to love and be loved by.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
9144e7 No.406540
>>406538
i feel you mate,
i have been blessed with a few girlfriends over the years and now that im in my mid twenties i use fetlife to go to munches and other bdsm meetups. have met lovely, non judgy people.
even go to private parties because of these people
but yeah, still have fleshlites and stuff at home, dont use them much,
but every now and then.
stay strong, and honestly, just be passionate and unapologetic around girls. Be confindent.
you can talk about the most weeb shit, but if you are confident, not sorry, and can back up your viiews, they will respect you for it.
CONFIDENCE IS KEY! and it does require some fake it till you make it art first.
wish you luck
you mind sharing your approximate age?
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
728254 No.406543
>>406540
One /fit/itzen's experience with "fake it until you make it" showed it's kinda bullshit, but what is important is to be honest about your awkwardness. But still, thank you for the advice.
Early Thirties
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
9144e7 No.406544
>>406543
faking it and stuff is definitely not the answer for everything.
more important is being able to be confident and secure in your area of interest. + then find a way into your neiche area to meet people.
I found that one of the hardest aspects is not seeming too enthousiasitc/desperate. which only get harder the longer youve been single or more in need of love you are.
but unfortunately thats one of those things girls are sensitive to.
the fake it till you make it is not just about lying, but more to get more comfortable and confident in these circumstances. and to what is more effective social interaction
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
53aab2 No.406577
>>406540
> i use fetlife to go to munches and other bdsm meetups. have met lovely, non judgy people.
>even go to private parties because of these people
Are these like normal non-sexual IRL meetups except everyone has a shared interest is a fetish?
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
9144e7 No.406582
>>406577
yes,
just at bars and stuff
but its a good place to meet people. i ended up spending the night with someone after
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
cd34ab No.406592
Well Anons, it's been over a month, and version one of my slimegirl has been sitting in my junk box for a good chunk of that time, with no use whatsoever. I've found some uses with the junk silicone- which mostly involves shredding it to pieces (with the use of a hamburger meat grinder) and using the shredded material as filler for other projects.
Which means, I'm going to cut up and deconstruct onahole V1 into the consistency of the stuff in the bag, which is coincidentally the same silicone I used for for the face test.
This means that this will be the last time you will see version 1 as whole hole. Therefore, if you want any pictures before I do the deed, I will take any requests.
And if maker anons want some more advice on shredding silicone, I will be happy to provide what I know.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
Post last edited at
a83156 No.406609
>>406592
Make a video of you using it.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.
9afddc No.406626
>>406462
Hey. I'm a non-/monster/ person who just had an erotic dream about a monster girl and decided to look for stroke material here. I saw this in the catalog and just had to see what was up. I won't be making this, but I've got to say this is an admirable piece of autistic endeavor you've created in this thread. After looking through the process, you make me wish I had a 3D printer. Good on you for sharing with your friends.
Disclaimer: this post and the subject matter and contents thereof - text, media, or otherwise - do not necessarily reflect the views of the 8kun administration.