/k/ - Weapons

https://www.youtube.com/watch?v=D5_ogU4Jzt4

>Colin Furze wrist mounted flamethrower

https://ia800801.us.archive.org/4/items/howtomollys/howtomollys.mp4

>>668543

Maybe empty PestXpert Wasp Jet Long Reach spray and fill it with flammable liquid. The PestXpert Wasp Jet Long Reach spray can spray up to 6m.

>>668578

>Someone didn't read the OP

Then again, there's not much more to add. It's either some version of molotov or a version of a tank that uses pressure to shoot fire.

>Super soaker full of gasoline

>Copper pipe glued to the tip to prevent melting plastic

>Fiery wick attached to the end

Every fire-based weapon is going to be a variation on these two things.

Have anyone tried to convert the high pressure water blaster into firethrower? I never seen anyone tried that method.

>>668590

OP is retarded and his thread sucks so I don't really care

come on goys do you not have any imagination or crazy ideas

>>668607

For fire? It's all been done before. What more do you want? Actually, do YOU have any other ideas?

>>668591

Sounds like a cool idea, but every high-pressure water system I've used, recreational, commercial and industrial, leaks like hell. It would be more feasible if you opened it up and modified it the internals.

someone on 4/k/ used a scuba tank and a pressure washer sprayer to make a flamethrower that could shoot flammable substances +15m, IIRC he had some trouble getting the fuel/air mixture just right by using more or less viscous fuels and differing the sprayer size to get optimal droplet sizes to burn.

Other then that, making substances is not as hard as getting them to burn efficiently… Just make sure you always follow the law and do not cross into full retard territory like vid related

>>668591

Its easier to build a M1 flamethrower.

>>668607

OK. Everybody is only talking about setting things on fire from the outside, never about starting a fire inside of an enemy.

So why not build a hollowpoint incendiary (call it extended tracer) round that breaks up on impact and get stuck inside of the body.

Remember that greek anarchist that got a flare stuck in her knee?

Anyone know a good recipe for flammenwerfer fuel?

I've tried various %s of gasoline to kerosene but it all burns too quickly and limits my werfing range.

>>668826

You need a thickener. Dehydrated soap and Styrofoam work wonders.

>>668829

Yeah something to slow the burn. But ideally it wouldn't make my fuel super thick and hard to squirt. My setup will only supply 50psi.

>>668826

3/4 Low octane gasoline (marine fuel) + 1/4 heavyweight engine oil.

If you feel it's still not enough, you add styrofoam as a thickener, mix it and let it dissolve in it until you reach the desired consistency.

>>668830

Optimal is having it sticky while being liquid as fuck. The idea is it goes everywhere, even through nooks and crannies. Besides that the two additives tend to make it burn longer.

>>668832

Yeah that would be ideal. I'll give you'r suggestions a try.

>>668831

Thanks