Allowed file types:jpg, jpeg, gif, png, webm, mp4, pdfMax filesize is 16 MB.Max image dimensions are 15000 x 15000. You may upload 5 per post.
File: 2b0656f68793d82⋯.jpg (17.88 KB, 355x299, 355:299, 1a.jpg)
Strelok 04/14/18 (Sat) 19:18:25 0bd89b No.572593
Having a lot of trouble getting my grip screw all the way in. The screw hole seems to get narrower for some reason. Any suggestions on how I can get it all the way in and not brake my receiver?
Strelok 04/14/18 (Sat) 19:30:57 6ae0d0 No.572601
> Didn't describe which gun
> Didn't post pictures
> Misspelled "break"
There has got to be an award for "most retarded post of the day". I nominate this post.
Strelok 04/14/18 (Sat) 19:32:03 891f21 No.572602
>>572593
What's the brand on the lower?
>>572601
Is clearly an AR based on pic related hardware
Strelok 04/14/18 (Sat) 19:36:53 22abb6 No.572604
>>572602
>mommy said use jewgle image search
>op shouldn't have to do his own descriptive work
you can't salvage this low energy with a vpn, cuck
Strelok 04/14/18 (Sat) 19:57:11 891f21 No.572610
File: be9b4b1a4b30688⋯.gif (1019.34 KB, 500x245, 100:49, be9b4b1a4b30688ff640ebf1f3….gif)
>>572604
>reverse image search
I knew what this thread was about before even clicking on it, chuck the cuck
Strelok 04/14/18 (Sat) 20:10:28 689100 No.572614
Cut a bit off of the screw?
Strelok 04/14/18 (Sat) 21:37:41 855e2d No.572650
>>572614
This, you wanna mess with the screw before you touch the reciever
Strelok 04/14/18 (Sat) 22:26:33 967365 No.572672
Make sure the bolt fits without the pistol grip. If yes, check the fit to the pistol grip by itself. If the pistol grip is the problem, Dremel or file the grip to a proper fit.
Strelok 04/14/18 (Sat) 23:22:41 b950dd No.572694
>The screw hole seems to get narrower for some reason.
Get a 1/4 - 28 bottoming tap and run it down the hole. Use thread cutting oil, and every revolution or so back off a half a turn to break the chips.